Hongnor DM- 1 Spec 1/7 4WD RTR

The DM-1 chassis and lay-down push rods big bore shocks looks for all intents and purposes like a real F1 with three very detailed DTM bodies to choose from. There are features on this car that are unparalleled anywhere in the world.  The first thing that strikes you is the sheer scale of the car. The next is the sheer speed and handling characteristics. There is a rear airflow diffuser that creates exceptional down force to the rear tyres like a real F1 which gets all the power down to the track.  The drive line is from the X1CR range of cars so the reliability is proven. The arms and pivot ball suspension is new with special pivot ball dust covers to keep out the dirt and dust. The universals are longer and used on both front and rear. The 2 speed is the shoe type for smoother gear change and the pinions are the screw on type so you can change ratios easily. There are many main gears and pinion ratios available as options. As always we have used the best possible materials as you can see in the attached pictures.  

DM-1 High Performance Features:

*High impact large front bumper and foam bumper.
*CNC machined steel transmission bevel gears.
*CNC machined aluminium front shock mount.
*CNC machined aluminium rear shock mount with heat sink.
*Low C. G. lay-down steering servo and throttle servo mount.
*Front and rear push rod suspension design.
*Threaded lay-down 13mm big bore shocks for front and rear.
*Adjustable ackerman steering geometry design.
*Graphite front plate.
*Graphite low centre of gravity radio tray.
*Front pivot ball suspension with dust boot covers.
*Rear pivot ball uprights for quick geometry changes.
*Spring steel universal joints for front and rear.
*Adjustable blade type sway bar for front and rear.
*Adjustable down-stop and up-stop suspension design.
*CNC machined 7075-T6 hard coated chassis brace.
*Quick release centre differential mount design.
*Convenient carry handle in the centre of the car.                                
*Changeable roll centre design for front and rear suspension.
*CNC machined steel brake discs.
*Special semi-metallic brake pads.
*Shoe type 2 speed transmission.
*CNC machined clutch bell with screw-on changeable gears.
*CNC machined 7075-T6 aluminium, milled out slim line chassis.
*Secure transponder mount.
*High flow air filter for maximum engine protection.
*Side body mounts and body protector.
*Rear air flow diffuser creates more down force.
*Exhaust deflector design to protect the inside of the body.

*Chrome exhaust pipe detail parts.
*High grip radial tires on 17mm hex wheels.
*Choice of different body designs.

Technical Data:

Lenght:            635mm

Width:              305mm

Wheelbase:    375mm

Caster Angle:10~18 degree

Front Toe-In:    Adjustable

Rear Toe-In:     Adjustable

Front Camber: Adjustable

Rear Camber: Adjustable

F/R Stabilizer: Adjustable

Clutch Bell :       16T-20T

Spur Gears:       48T-44T

Gear Ratio:9.923:1 ~7.277:1

Weight:3,652g

(Included Engine and Radio.) 

Additional Parts Needed

◎ Thread Loctite.

◎ RC Car Fuel(20%).

◎ Glow Plug and Cross Wrench.

◎ A 1.2V Glow Plug Ignitor.

◎ 2 Channel Radio Set.

◎ Engine

◎ Tuned Pipe Set.

◎ Starter Box or A 12V Starter.

◎ UM-3 Batteries (12 pcs)